-DC V: 600.0mV/6.000/60.00/600.0/600V
(Input Impedance: 10MΩ, 100MΩ only 600mV) ±0.5%±2dgt (600.0mV/6.000/60.00/600.0V) ±0.8%±3dgt (600V)

-AC V: 6.000/60.00/600.0/600V
(Input Impedance: 10MΩ) ±1.0%±3dgt
(6.000/60.00/600.0V)±1.5%±3dgt (600V)

-DC A: 600/6000µA/60/600mA/6/10A ±1.2%±3dgt (600/6000µA/60/600mA) ±2.0%±5dgt (6/10A)

-AC A: 600/6000µA/60/600mA/6/10A ±1.5%±4dgt (600/6000µA/60/600mA) ±2.2%±5dgt (6/10A)

-Ω: 600Ω/6/60/600kΩ/6/60MΩ ±1.0%±2dgt
(600Ω/6/60/600kΩ/6MΩ) ±2.0%±3dgt (60MΩ)

-Continuity buzzer: 0 - 600Ω (Buzzer sounds below 100Ω)

-Diode test: 2.8V Release Voltage:Approx. 0.4mA Test Current

-Capacitance: 40/400nF/4/40/400/4000µF

-Frequency: 10/100/1000Hz/10/100/1000kHz/10MHz

-DUTY: 0.1 - 99.9% (Pulse width/Pulse period) ±2.0%±2dgt (- 10kHz)

-Temperature: -50 - 300ºC (-58 - 572ºF)
(with the use of Temperature probe 8216)
Note: KEW 1011 can measure max. 700ºC
In order to measure over 300ºC, please use a K-type temperature probe available in the market.

-Applicable standards: IEC 61010-1 CAT III 300V Pollution degree 2
IEC 61010-1 CAT II 600V Pollution degree 2
IEC 61010-031
IEC 61326

-Display: 6040 Counts

-Power source: R6 (1.5V) × 2 (Auto-power-OFF within 15 minutes)

-Dimensions: 161(L) × 82(W) × 50(D)mm

-Weight: Approx. 280g

-Included Accessories: 7066A (Test leads)
8216 (K-type Temperature probe)
0.8A/600V (Ceramic Fuse) × 1built-in
10A/600V (Ceramic Fuse) × 1built-in
R6 × 2Instruction Manual

-Optional Accessories: 7234 (Crocodile clip test lead)
9095 (Carrying case)